Engineering, 13.03.2020 04:12, hussja
For a bolted assembly, the stiffness of each bolt is kb = 3 Mlbf/in and the stiffness of the members is km = 13 Mlbf/in per bolt. The joint is subject to occasional disassembly for maintenance and should be preloaded accordingly. A fluctuating external load is applied to the entire joint with Pmax = 80 kips and Pmin = 20 kips. Assume the load is equally distributed to all the bolts. It has been determined to use 1/2 in-13 UNC grade 8 bolts with rolled threads.
(a) Determine the minimum number of bolts necessary to avoid yielding of the bolts.
(b) Determine the minimum number of bolts necessary to avoid joint separation.
Answers: 1
Other questions on the subject: Engineering
Engineering, 03.07.2019 15:10, brooklyn674
Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?
Answers: 3
Engineering, 04.07.2019 16:10, TheOriginalMeyah
An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)
Answers: 2
Engineering, 04.07.2019 18:20, cristykianpour
Describe one experiment in which the glass transition temperature and melting temperature of a totally amorphous thermoplastic material can be determined. show the relevant experimental results in a diagram which should be properly annotated with the two temperatures clearly marked. what is likely to happen to the curve in the diagram if the amorphous polymer is replaced by a thermosetting type?
Answers: 2
Do you know the correct answer?
For a bolted assembly, the stiffness of each bolt is kb = 3 Mlbf/in and the stiffness of the members...
Questions in other subjects:
Chemistry, 03.07.2019 19:20
Computers and Technology, 03.07.2019 19:20
Mathematics, 03.07.2019 19:20
