Engineering, 13.03.2020 03:32, donnafranks2003

A reactive muffler is to be designed to produce a transmission loss of 20 dB at 150 Hz. The inlet and outlet and outlet pipes are 60 mm in diameter and the average temperature of the exhaust gas is 100C. (a) Show that the transmission loss of the reactive muffler is given by     2 1 2 4 TL m m kL    10log 1 1 sin     where m is the area ratio of the expansion chamber to the inlet/outlet duct. (b) Determine the size of the expansion chamber – the cross-sectional area A2 and the length L. You may take the speed of sound at 20C as 343 m s-1

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 15:10, theamandawhite

Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.

Answers: 1

continue

Engineering, 04.07.2019 16:10, Arealbot

The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.

Answers: 1

continue

Engineering, 04.07.2019 18:10, ayoismeisjjjjuan

Manometers are good examples of measuring instruments, nowadays they are not as common as before. a)-capacitive probe gauges b)-gravitational gauges deformation ) gauges d)-digital gauges

Answers: 1

continue

Engineering, 04.07.2019 18:10, mamasbug4285

An air compression refrigeration system is to have an air pressure of 100 psia in the brine tank and an allowable air temperature increase of 60°f for standard vapor compression cycle temperatures of 77 f entering the expansion cylinder and 14 f entering the compression cylinder, calculate the coefficient of performance a. 2.5 b 3.3 c. 4.0 d. 5.0

Answers: 3

continue

Do you know the correct answer?

A reactive muffler is to be designed to produce a transmission loss of 20 dB at 150 Hz. The inlet an...