Engineering, 13.03.2020 02:31, jojonono

You install a pumping well into a confined aquifer with a transmissivity, T = 7.0 x 10⁻³ m²/s, and storativity, S = 5.0 x 10⁻⁴ and operate it at a pumping rate of 9.2 x 10^⁻³ m³/s. To test its performance you install a monitoring well 5 m away from the pumping well and notice the observed drawdown 6 hours into your pumping scheme does not match theoretical predictions. You investigate the site and notice a stream 15 m away from your pumping well that is likely recharging your aquifer.
(a) Did your initial prediction of drawdown over- or under- predict the observed drawdown in the monitoring well?
(b) Using the principle of superposition, estimate a more realistic prediction of drawdown in the monitoring well (assume that the monitoring well is located in between the pumping well and the stream).

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, alyssabailey7545

Give heat transfer applications for the following, (i) gas turbines (propulsion) ) gas turbines (power generation). (iii) steam turbines. (iv) combined heat and power (chp). (v) automotive engines

Answers: 1

continue

Engineering, 04.07.2019 18:10, dval1146

You are making beer. the first step is filling the glass carboy with the liquid wort. the internal diameter of the carboy is 15 in., and you wish to fill it up to a depth of 2 ft. if your wort is drawn from the kettle using a siphon process that flows at 3 gpm, how long will it take to fill?

Answers: 1

continue

Engineering, 04.07.2019 18:10, mirmir62

Machinery that is a key part of the process and without which the plant or process cannot function is classifed as: (clo4) a)-critical machinery b)-essential machinery c)-general purpose machinery d)-none of the specified options.

Answers: 1

continue

Engineering, 04.07.2019 19:10, gabrielaperezcz

Air inially occupying a volume of 1 m2 at 100 kpa, 27 c undergoes three internally reversible processes in series. process 1-2 compression to 500 kpa during which pv constant process 2-3 adiabatic expanslon to 100 kpa process 3-1: constant-pressure expansion to 100 kpa (a) calculate the change of entropy for each of the three processes. (b) calculate the heat and work involved in each process. (c) is this cycle a power cycle or refrigeration cycle?

Answers: 3

continue

Do you know the correct answer?

You install a pumping well into a confined aquifer with a transmissivity, T = 7.0 x 10⁻³ m²/s, and s...