3 sensors are attached to a printing
device with three alarms attached to
the sensors. The...
Engineering, 11.03.2020 02:49, jsmn9083
3 sensors are attached to a printing
device with three alarms attached to
the sensors. The first sensor A detects
if the device needs ink
the second sensor B detects if the
device needs repairs. The third sensor
C, delects of the device jams.
An alarm sounds of two or more or
more problems occur
(1) device a truth table for the system
2) Write an SOP expression for the
system & minimize it.
Answers: 1
Engineering, 04.07.2019 18:10, 0436500
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Engineering, 04.07.2019 19:10, LadyHolmes67
Apressure vessel with an r/t 20 cannot be treated as thin walled vessel. a)-trune b)- false
Answers: 3
Engineering, 04.07.2019 19:10, ultimateapes
When subject to a steady load (within elastic range) over a long period of time, what is the major difference in material behavoir between steel and plastic?
Answers: 2
History, 02.02.2020 19:53
English, 02.02.2020 19:53
English, 02.02.2020 19:53
Mathematics, 02.02.2020 19:53
History, 02.02.2020 19:53