Consider a pinned-fixed beam subject to a uniform load. The equation for the resulting deflections is:
y = (/48E) (2x⁴ - 3Lx³ + L³x)
Use the following parameter values in your computation (making sure that you use consistent units):
L = 400 cm, E = 52,000 kN/cm², = 32,000 cm⁴, and = 4 kN/cm.
Determine the point of maximum deflection and also the value of maximum deflection using the MATLAB script. (Round the final answers to four decimal places.)

The drive force for diffusion is 7 fick's first law can be used to solve the non-steady state diffusion. a)-true b)-false

Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.

Which one from below is not one of the reasons of planning failures? (clo3) a)-planner is careless. b-planner spend less time in the field but more time on the desk c)-planner is not qualified d)-planner does not have sufficient time to properly plan