Engineering, 10.03.2020 08:22, QuestionsAnsweredNow

Kirchoff's Law states that, by the time current has returned to its source, all
must be used
Resistance
Electron flow
Voltage
Wattage

Answers: 3

Show answers

Answers

Kirchoff's Law Kirchoff's Law states that, by the time current has returned to its source is explained in the following.

Explanation:

Kirchhoff's Current Law (KCL) is Kirchhoff's first law that deals with the conservation of charge entering and leaving a junction. ... In other words the algebraic sum of ALL the currents entering and leaving a junction must be equal to zero.Kirchoff's laws apply for a given instant in time. So the voltages at a given moment around a loop will all sum to zero, or currents in a node sum to zero if you look at the instantaneous voltage and current. But they will be out of phase.Kirchhoff Voltage Law states that ''The algebraic sum of all voltages (source voltage and voltage drops) is equal to zero around a close path''. This is called KVL ( Kirchhoff Voltage Law) equation. The source voltage is equal to the sum of all voltage drops. Kirchhoff's Voltage Law (KVL) is Kirchhoff's second law that deals with the conservation of energy around a closed circuit path. Kirchhoff's laws can be used to determine the values of unknown values like current, Voltage in the circuit. These laws can be applied on any circuit (with some limitation), and useful to find the unknown values in complex circuits and networks.

answered: lizredrose5

Kirchoff's law states that by the time current has reached to its source all voltage must be used.

Explanation:

Kirchoff's voltage law states that the algebraic sum of all the voltages across a closed loop is zero. As the circuit is a closed conducting path, no energy is lost. ices All the voltage that is supplied from the voltage source is dropped at the devices in the circuit.

The potential difference maintained by the voltage source enables the flow of current across the circuit. As the supplied voltage drops at each elements of the circuit, all voltage is used by the time current has returned to the surface.

answered: Guest

In a fire lane/near a fire hydrantat any curb/ramp for persons with disabilitiesbeside another parked vehicle (double parking)within an intersection

answered: Guest

answer: 500 wph.

explanation:

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, bryneosburn

Line joining liquid phase with liquid and solid phase mixture is known as: a) liquidus b) solidus c) tie line d) none of the mentioned

Answers: 2

continue

Engineering, 04.07.2019 18:10, tjeffers90028

Refrigerant 134a enters an insulated compressor operating at steady state as saturated vapor at -26°c with a volumetric flow rate of 0.18 m3/s. refrigerant exits at 9 bar, 70°c. changes in kinetic and potential energy from inlet to exit can be ignored. determine the volumetric flow rate at the exit, in m3/s, and the compressor power, in kw.

Answers: 1

continue

Engineering, 04.07.2019 18:20, safiyabrowne7594

Ahe-xe mixture containing a 0.75 mole fraction of helium is used for cooling electronics in an avionics application. at a temperature of 300 k and atmospheric pressure, calculate the mass fraction of helium and the mass density, molar concentration and molecular weight of the mixture. if the cooling capacity is 10 l, what is the mass of the coolant?

Answers: 3

continue

Engineering, 04.07.2019 18:20, mjcbs21

What is the heat treatment of metals? what is the benefit of it? why and how it's useful? answer in details, do not write by hand.

Answers: 3

continue

Do you know the correct answer?

Kirchoff's Law states that, by the time current has returned to its source, all
must be used