Engineering, 10.03.2020 07:32, brooklyn4932

An oil well has a formation pressure of 2500 psi and a bubble point pressure of 2500 psi. A production test resulted an oil rate of 48 bpd and a water rate of 72 bpd at a measured Pwf of 2000 psi. Calculate the following and plot the results to create an IPR curve for this well.

a. The maximum oil, water and total fluid rate possible.
b. The oil, water and total production rate with a Pwf = 500 psi.
c. Determine the Water Cut (%) at Pwf test, Pwf = 500 psi and at Qmax total fluid.
d. Create the Inflow Performance Curves on a Pwf vs Q graph for this well.

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:20, 3076850

Prove the equivalence between the two statements of the 2nd law of thermodynamics (i. e., a violation of one statement leads to the violatio the other statement)

Answers: 2

continue

Engineering, 04.07.2019 19:10, gabigalvis1091

What is the main objective of using reheat rankine cycle?

Answers: 3

continue

Engineering, 04.07.2019 19:10, jennymares

Abarometer contains mercury with a density of 13600 kg/m3. atmospheric conditions are 95.8 kpa and 20 °c at 20 °c, the vapor pressure of the mercury is 0.000173 kpa. the column of mercury will rise to a height of most nearly. select one: a)- 0.38 m b)- 0.82 m c)- 0.48 m d)- 0.72 m

Answers: 1

continue

Engineering, 04.07.2019 19:10, shunna33

Plan an experiment to measure the surface tension of a liquid similar to water. if necessary, review the ncfmf video surface tension for ideas. which method would be most suitable for use in an undergraduate laboratory? what experimental precision could be expected?

Answers: 2

continue

Do you know the correct answer?

An oil well has a formation pressure of 2500 psi and a bubble point pressure of 2500 psi. A producti...