Engineering, 10.03.2020 04:32, nellymbh4227

The very top of the film shows no reflected light, indicating that the thickness is less than 1/4 the wavelength of visible light within the film, since the phase change on reflection for the beam from the first surface of the film is π radians and the phase change on reflection from the second surface of the film is 0 radians, making the interfering rays mostly out of phase from that part of the film. Given this information, what is the approximate thickness of the film at the first bright fringe counting from the top of the film, in terms of the wavelength of light in vacuum λ, and the refractive index of the film n?

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, volleyballfun24

If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.

Answers: 3

continue

Engineering, 04.07.2019 18:10, viicborella

Steel is coated with a thin layer of ceramic to protect against corrosion. what do you expect to happen to the coating when the temperature of the steel is increased significantly? explain.

Answers: 1

continue

Engineering, 04.07.2019 18:10, bunnles

During a steady flow process, the change of energy with respect to time is zero. a)- true b)- false

Answers: 2

continue

Engineering, 04.07.2019 18:10, agpraga23ovv65c

Carbon dioxide gas expands isotherm a turbine from 1 mpa, 500 k at 200 kpa. assuming the ideal gas model and neglecting the kinetic and potential energies, determine the change in entropy, heat transfer and work for each kilogram of co2.

Answers: 2

continue

Do you know the correct answer?

The very top of the film shows no reflected light, indicating that the thickness is less than 1/4 th...