Engineering
Engineering, 07.03.2020 04:06, asims13

B is the desired product, and X and Y are foul pollutants that are expensive to get rid of. The specific reaction rates are at 27 C. The reaction system is to he operated at 27°C and 4 atm. Pure A enters the system at a volumetric flow of 10 dm3/min. (a) Sketch the instantaneous selectivities (SBAoSB/Y, and SBXY-ry(rxtrY)) as a function of the concentration of CA (b) Consider a series of reactors. What should be the volume of the first reactor? (c) What are the effluent concentrations of A, B, X, and Y from the first reactor? (d) What is the conversion of A in the first reactor? (e) If 99% conversion of A is desired, what reaction scheme and reactor (f) Suppose that E 20,000 cal/mol, E2 10,000 cal/mol, and Es 30,000 cal/mol. What temperature would you recommend for a single CSTR with and an entering concentration of A of 0.1 mol/dm? sizes should you use to maximize SB/xy? a space time of 10 min would you choose? (g) If you could vary the pressure between 1 and 100 atm, what pressure

answer
Answers: 1

Other questions on the subject: Engineering

image
Engineering, 03.07.2019 14:10, makaylashrout77
Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.
Answers: 2
image
Engineering, 03.07.2019 15:10, EmilySerna
Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.
Answers: 1
image
Engineering, 04.07.2019 18:10, aaliyah80
The drive force for diffusion is 7 fick's first law can be used to solve the non-steady state diffusion. a)-true b)-false
Answers: 1
image
Engineering, 04.07.2019 18:10, xboxdude06
Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.
Answers: 1
Do you know the correct answer?
B is the desired product, and X and Y are foul pollutants that are expensive to get rid of. The spec...

Questions in other subjects:

Konu
Biology, 25.03.2020 05:36
Konu
English, 25.03.2020 05:36