Engineering
Engineering, 07.03.2020 00:14, macycj8

Two components in cryogenic equipment are held together by stainless steel (ASTM A437 B4B) bolts with diameter of 25 mm. The bolts have a thermal conductivity of 23.9 W/m. K, a specific heat of 460 J/kg .K, and a density of 7.8 g/cm". When the cryogenic fluid flows between the two components, the bolts are submerged in the cold fluid. The length of each bolt submerged in the cryogenic fluid is 5 cm, and the initial temperature of the bolts is 10°C. The cryogenic fluid has a temperature of -40°C with a convection heat transfer coefficient of 40 W/m².K. The ASME Code for Process Piping limits the minimum suitable temperature for ASTM A437 B4B bolts to -30°C (ASME B31.3-2014, Table A-2M). If the bolts are exposed to the cold fluid for 12 min, will they still comply with the ASME code? How long will it take for the bolts to reach the minimum suitable temperature?

answer
Answers: 2

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 03:10, lauriepdx17
What precautions should you take to prevent injuries when dealing with heavy loads?
Answers: 1
image
Engineering, 04.07.2019 18:10, mirmir62
Machinery that is a key part of the process and without which the plant or process cannot function is classifed as: (clo4) a)-critical machinery b)-essential machinery c)-general purpose machinery d)-none of the specified options.
Answers: 1
image
Engineering, 04.07.2019 18:20, 1230bering
Select any two (2) areas of applications of chain-drive. (clo4) a)-permanent lubrication necessary b)-hydraulic forklift truck operation c)-rigging and heavy moving materials d)-relatively high maintenance costs e)-costlier than belt drives
Answers: 2
image
Engineering, 04.07.2019 18:20, jessie8022
Apiston-cylinder device contains 0.1 m3 of liquid water and 0.9 m3 of water vapor in equilibrium at 800 kpa. heat is transferred at constant pressure until the temperature of water reaches 350 °c. determine (a) the quality of water at the initial state (b) the work associated with this process, (c) the heat associated with this process.
Answers: 2
Do you know the correct answer?
Two components in cryogenic equipment are held together by stainless steel (ASTM A437 B4B) bolts wit...

Questions in other subjects: