Engineering, 06.03.2020 23:55, brebun4742
Each ATmega128 USART module has two flags used to indicate its currenttransmitterstate: the Data Register Empty (UDRE) flag and TransmitComplete (TXC) flag. What is the difference between these two flags, andwhich one always gets set first as the transmitter runs? You will probablyneed to read about theData Transmissionprocess in the datasheet (includ-ing looking at any relevant USART diagrams) to answer this question
Answers: 2
Engineering, 04.07.2019 18:10, QueenLife4869
Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.
Answers: 3
Engineering, 04.07.2019 19:10, nbunny7208
What is the chief metrological difference between measuring with a microscope and with an electronic comparator? a. the microscope is limited to small workpieces. a. the microscope is limited to small workpieces. c. the comparator can only examine one point on the workpiece. d. the microscope carries its own standard.
Answers: 1
Engineering, 04.07.2019 19:20, qurreab26
A5 kg block of fe is dropped into a very large vat of water. the fe and water initial temperatures are 95 and 25 c, respectively. the fe final temperature is 25 c and the water can be treated as a thermal reservoir,. treated as a thermal reservoir take the water to be the system and determine the entropy generation. report vour answer in kj/k.
Answers: 1
Each ATmega128 USART module has two flags used to indicate its currenttransmitterstate: the Data Reg...
Physics, 01.03.2021 22:20
Social Studies, 01.03.2021 22:20
Mathematics, 01.03.2021 22:20
Computers and Technology, 01.03.2021 22:20