Engineering, 06.03.2020 23:18, ddlc28
Hot combustion gases, modeled as air behaving as an ideal gas, enter a turbine at 1100 kPa, 1600 K with a mass flow rate of 0.2 kg/s and exit at 300 kPa and 1000 K. If heat transfer from the turbine to its surroundings occurs at a rate of 16 kW, determine the power output of the turbine, in kW.
Answers: 2
Other questions on the subject: Engineering
Engineering, 04.07.2019 18:10, keigleyhannah30
Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.
Answers: 3
Engineering, 04.07.2019 18:10, caitlynnpatton1208
Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.
Answers: 3
Do you know the correct answer?
Hot combustion gases, modeled as air behaving as an ideal gas, enter a turbine at 1100 kPa, 1600 K w...
Questions in other subjects:
History, 07.03.2020 05:29
