Engineering
Engineering, 06.03.2020 21:34, AdhoraM11571

N a simple electric circuit, Ohm's law states that V=IR, where V is the voltage in Volts, I is the current in Amperes, and R is the resistance in Ohms. Assume that, as the battery wears out, the voltage decreases at 0.02 Volts per second and, as the resistor heats up, the resistance is increasing at 0.04 Ohms per second. When the resistance is 300 Ohms and the current is 0.02 Amperes, at what rate is the current changing?

answer
Answers: 2

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, settasav9641
Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.
Answers: 3
image
Engineering, 04.07.2019 18:10, johnthienann58
Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented
Answers: 2
image
Engineering, 04.07.2019 18:10, michellerosas
Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.
Answers: 3
image
Engineering, 04.07.2019 18:10, Strick1530
Which of the following components of a pid controlled accumulates the error over time and responds to system error after the error has been accumulated? a)- proportional b)- derivative c)- integral d)- on/off.
Answers: 2
Do you know the correct answer?
N a simple electric circuit, Ohm's law states that V=IR, where V is the voltage in Volts, I is the c...

Questions in other subjects:

Konu
Mathematics, 23.06.2020 19:01
Konu
Computers and Technology, 23.06.2020 19:01