Engineering, 04.03.2020 17:21, pakabigail4796
An electrical resistance strain gage has a gage factor of 2 and a resistance of 120 Ω. If this gage is connected to lead wires with a combined resistance of 10 Ω, what will be the effective gage factor for the combined system.
Answers: 3
Engineering, 04.07.2019 18:10, xboxdude06
Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.
Answers: 1
Engineering, 04.07.2019 18:20, karatsgrande3772
Determine the damped natural frequencies and the steady state response of a decoupled damped forced two degrees of freedom system. 10ä1 + 2q1 20q1 10 cos t; 10q2 +4q2 + 40q2 10 cos t
Answers: 3
Engineering, 04.07.2019 19:10, nida7864
An engine, weighing 3000 n, is supported on a pedestal mount. it has been observed that the engine induces vibration into the surrounding area through its pedestal at the maximum operating speed. determine the stiffness of the dynamic vibration absorber spring in (n/m) that will reduce the vibration when mounted on the pedestal. the magnitude of the exciting force is 250 n, and the amplitude of motion of the auxiliary mass is to be limited to 2 mm note: in this question type-in right numbers, no decimals, no fractions, no unit. approximate to right number if needed
Answers: 3
An electrical resistance strain gage has a gage factor of 2 and a resistance of 120 Ω. If this gage...
Mathematics, 06.05.2021 23:00
Mathematics, 06.05.2021 23:00
Mathematics, 06.05.2021 23:00
Mathematics, 06.05.2021 23:00
Mathematics, 06.05.2021 23:10
Mathematics, 06.05.2021 23:10