Engineering
Engineering, 04.03.2020 04:23, blazecarley

A process involves the removal of oil and other liquid contaminants from metal parts using a heat-treat oven, which has a volume of 15,000 ft3. The oven is free of solvent vapors. The ventilation rate of the oven is 2,100 cfm, and the safety factor (K) is 3. The solvent used in the process evaporates at a rate of 0.6 cfm (cubic feet per minute). The operator would like to know how long it would take the concentration to reach 425 ppm.

answer
Answers: 3

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, keigleyhannah30
Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.
Answers: 3
image
Engineering, 04.07.2019 18:10, leomessifanboy678
The filament of an incandescent lamp has a temperature of 2000k. calculate the fraction of radiation emitted in the visible light band if the filament is approximated as blackbody
Answers: 2
image
Engineering, 04.07.2019 18:10, salazjlove
Which of the following refers to refers to how well the control system responds to sudden changes in the system. a)-transient regulation b)- distributed regulation c)-constant regulation d)-steady-state regulation
Answers: 1
image
Engineering, 04.07.2019 18:10, namira16
Which of the following controllers anticipates the future from the slope of errors over time? a)-proportional b)-on/off c)-integral d)-derivative.
Answers: 2
Do you know the correct answer?
A process involves the removal of oil and other liquid contaminants from metal parts using a heat-tr...

Questions in other subjects:

Konu
Mathematics, 09.04.2021 01:00
Konu
Chemistry, 09.04.2021 01:00