Engineering
Engineering, 03.03.2020 23:26, Crxymia

Declare integer product declare integer number product = 0 do while product < 100 display ""Type your number"" input number product = number * 10 loop display product End While

answer
Answers: 3

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:20, annette211pdd8v9
For a gate width of 2 m into the paper, determine the force required to hold the gate abc at its location.
Answers: 1
image
Engineering, 04.07.2019 19:20, GusGus11
The power source in a certain welding setup generates 3500w that is transferred to the low carbon steel work with a heat transfer factor of 0.85. the melting factor in the operation is 0.45. a continuous fillet weld is to be made with a cross-sectional area of 23 mm2 determine the travel speed at which the welding can be accomplished.
Answers: 3
image
Engineering, 06.07.2019 03:10, cchotshot
Tom is having a problem with his washing machine. he notices that the machine vibrates violently at a frequency of 1500 rpm due to an unknown rotating unbalance. the machine is mounted on 4 springs each having a stiffness of 10 kn/m. tom wishes to add an undamped vibration absorber attached by a spring under the machine the machine working frequency ranges between 800 rpm to 2000 rpm and its total mass while loaded is assumed to be 80 kg. a) what should be the mass of the absorber added to the machine so that the natural frequency falls outside the working range? b) after a first trial of an absorber using a mass of 35 kg, the amplitude of the oscillation was found to be 10 cm. what is the value of the rotating unbalance? c) using me-3.5 kg. m, find the optimal absorber (by minimizing its mass). what would be the amplitude of the oscillation of the absorber?
Answers: 1
image
Engineering, 06.07.2019 03:10, LouieHBK
Different between right hand turning tool and left hand turning tool ?
Answers: 1
Do you know the correct answer?
Declare integer product declare integer number product = 0 do while product < 100 display ""Type...

Questions in other subjects:

Konu
Computers and Technology, 07.03.2020 04:00
Konu
Mathematics, 07.03.2020 04:00