Engineering
Engineering, 03.03.2020 00:54, Nessaboo916

(a) Determine the specific volume of nitrogen gas at 8.5 MPa and 139 K based on the generalized compressibility chart and compare this result with the experimental value of 0.002002 m³/kg to (b).
(b) Determine the error involved.
(R = 0.2968 kPa. m³/kg. K, Tcr=126.2 K, Pcr=3.39 MPa)

answer
Answers: 3

Other questions on the subject: Engineering

image
Engineering, 03.07.2019 14:10, volleyballfun24
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
image
Engineering, 03.07.2019 15:10, theamandawhite
Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.
Answers: 1
image
Engineering, 04.07.2019 18:10, colin774
The higher the astm grain size number, the finer the gran is. a)-true b)-false
Answers: 2
image
Engineering, 04.07.2019 18:10, wirchakethan23
Hydraulic fluid with a sg. of 0.78 is flowing through a 1.5 in. i. d. pipe at 58 gal/min. the fluid has an absolute viscosity of 11.8 x 105 lbf-sec/ft2. is the flow laminar, turbulent or within the critical range? give both a numerical reynolds number and a term answer.
Answers: 3
Do you know the correct answer?
(a) Determine the specific volume of nitrogen gas at 8.5 MPa and 139 K based on the generalized comp...

Questions in other subjects:

Konu
Mathematics, 17.10.2020 04:01
Konu
History, 17.10.2020 04:01