Engineering, 03.03.2020 00:38, maevemboucher78
If the 3.5-kg block passes over the top B of the circular portion of the path with a speed of 3.5 m/s, calculate the magnitude NB of the normal force exerted by the path on the block at B. Determine the maximum speed vA which the block can have at A without losing contact with the path.
Answers: 3
Engineering, 04.07.2019 18:10, lowkeyqueenk
Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk
Answers: 1
Engineering, 04.07.2019 18:20, rhussein6452
Wiy doeres rere okhn a pump whon working betwon the same pressure range?
Answers: 2
Engineering, 04.07.2019 19:10, nida7864
An engine, weighing 3000 n, is supported on a pedestal mount. it has been observed that the engine induces vibration into the surrounding area through its pedestal at the maximum operating speed. determine the stiffness of the dynamic vibration absorber spring in (n/m) that will reduce the vibration when mounted on the pedestal. the magnitude of the exciting force is 250 n, and the amplitude of motion of the auxiliary mass is to be limited to 2 mm note: in this question type-in right numbers, no decimals, no fractions, no unit. approximate to right number if needed
Answers: 3
If the 3.5-kg block passes over the top B of the circular portion of the path with a speed of 3.5 m/...
Mathematics, 14.01.2020 18:31
Arts, 14.01.2020 18:31
Advanced Placement (AP), 14.01.2020 18:31
Mathematics, 14.01.2020 18:31