Engineering, 02.03.2020 23:06, savyblue1724707

Construct the Bode magnitude and phase plots on the semi-log charts for the following two transfer functions.
(a) H(ω) = jω/ω₀, ω₀ = 10⁴ rad/s.
(b) H(ω) = 1 + jω/ω, ω = 4 x 10³ rad/s.
(c) H(ω) = 1/(1 + jω/ω), ω= 2 x 10³ rad/s.
(d) H(W) = jω/jω₁/(1+ jω/jω₂), ω₁= 10⁴ rad/s, and ω₂= 2 x 10³ rad/s.

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, viicborella

Steel is coated with a thin layer of ceramic to protect against corrosion. what do you expect to happen to the coating when the temperature of the steel is increased significantly? explain.

Answers: 1

continue

Engineering, 04.07.2019 19:10, justkevin1231

Which of the following is the most important advantage of a large field of view? a. allows larger areas to be examined b. relieves eyestrain c. minimizes parallax errors. d. increases precision in proportion to the in- crease in field of view

Answers: 2

continue

Engineering, 04.07.2019 19:20, GusGus11

The power source in a certain welding setup generates 3500w that is transferred to the low carbon steel work with a heat transfer factor of 0.85. the melting factor in the operation is 0.45. a continuous fillet weld is to be made with a cross-sectional area of 23 mm2 determine the travel speed at which the welding can be accomplished.

Answers: 3

continue

Engineering, 04.07.2019 19:20, molly7654

Brief discuss how the presence of dislocations in crystal structures can be an advantage and a disadvantage to engineer and designers.

Answers: 3

continue

Do you know the correct answer?

Construct the Bode magnitude and phase plots on the semi-log charts for the following two transfer f...