Engineering
Engineering, 02.03.2020 18:05, hillmarilyn70pe8sy6

The elevation of Davis is 15 meters above mean sea level (msl). Donner Summit at the Sierra crest is 2200 meters above msl. Blue Canyon, on Interstate 80, is 1430 meters above msl. Assume that precipitation increases linearly as elevation increases. a. If Davis receives 40 cm of precipitation annually and Donner Summit receives 160 cm of precipitation, predict the annual precipitation at Blue Canyon. Show your work. b. Are there limitations to the assumption that precipitation increases with elevation? Explain. c. The mean annual air temperature in Davis is 17 degrees C. Predict the mean annual air temperature at Blue Canyon and at Donner Summit Explain your reasoning.

answer
Answers: 3

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, oshawn108
Ahot wire operates at a temperature of 200°c while the air temperature is 20°c. the hot wire element is a tungsten wire of 5 um diameter and 2 mm in length. plot using excel current, heat transfer and heat generated by the wire for air velocity varying from 1-10 m/s in steps of lm/s? matlab the sensor voltage output, resistance, or assume nu 0.989 re033pr13 take air properties at tr (200°c20°c)/2 = 110°c properties of tungsten: c 0.13 kj/kg. k 3 p 19250 kg/m k (thermal conductivity) = 174 w/m. k
Answers: 2
image
Engineering, 04.07.2019 18:20, miguel454545
Along 8-cm diameter steam pipe whose external surface temperature is 900c connects two buildings. the pipe is exposed to ambient air at 70c with a wind speed of 50 km/hr blowing across the pipe. determine the heat loss from the pipe per unit length. (b) air at 500c enters a section of a rectangular duct (15 cm x 20 cm) at an average velocity of 7 m/s. if the walls of the duct are maintained at 100c. a) the length of the tube for an exit temperature of the air to be 40 0c. b)the rate of heat transfer from the air. c) the fan power needed to overcome the pressure drop in this section of the duct.
Answers: 1
image
Engineering, 04.07.2019 19:10, gabigalvis1091
What is the main objective of using reheat rankine cycle?
Answers: 3
image
Engineering, 04.07.2019 19:10, jrcspiderman2003
Asteel wire of 2 mm diameter is fixed between two points located 2 m apart. the tensile force in the wire is 250n, if its density of steel is given by 7830 kg/m3 the fundamental frequency of vibration hz? ?
Answers: 3
Do you know the correct answer?
The elevation of Davis is 15 meters above mean sea level (msl). Donner Summit at the Sierra crest is...

Questions in other subjects: