Engineering, 02.03.2020 17:19, hannahking1869

A new municipal wastewater treatment plant plans to have an average flow rate of 5.3 MGD and a peak daily flow rate of 13.2 MGD. Primary sedimentation tanks are planned prior to secondary treatment processes.
Design a system with two primary sedimentation basins in parallel that each has a channel width of 20 ft. Assume an average overflow rate d of 1,000 gal/ft². Specify the required surface area, A (ft²), and tank length, L (ft) of each basin. Assuming a sidewater depth of 13 ft, calculate the total tank volume (ft2).

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, cowgyrlup124

Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.

Answers: 1

continue

Engineering, 03.07.2019 15:10, theamandawhite

Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.

Answers: 1

continue

Engineering, 04.07.2019 18:10, jadeochoa4466

The temperature of air decreases as it is compressed by an adiabatic compressor. a)- true b)- false

Answers: 2

continue

Engineering, 04.07.2019 19:10, Destinationz

Asteam is contained in a rigid tank with a volume of 1 m3. initially, the pressure and temperature are 7 bar and 500 oc, respectively. the temperature drops due to cooling process. determine: (1) the temperature at which condensation begins in °c, (2) the fraction of the total mass that has condensed when the pressure decreased to 0.5 bar. (3) the volume in m3 occupied by saturated liquid at the final state?

Answers: 3

continue

Do you know the correct answer?

A new municipal wastewater treatment plant plans to have an average flow rate of 5.3 MGD and a peak...