Engineering, 02.03.2020 16:55, bluepanda21

The air inside a chamber at T[infinity],i = 50 °C is heated convectively with hᵢ= 20 W/m² K by a 200-mm-thick wall having a thermal conductivity of 4 W/m K and a uniform heat generation of 1000 W/m³. To prevent any heat generated within the wall from being lost to the outside of the chamber at T[infinity],0 = 25 degree C with h₀ = 5 W/m² K, a very thin electrical strip heater is placed on the outer wall to provide a uniform heat flux, q₀ⁿ.
(a) Sketch the temperature distribution in the wall on T - x coordinates for the condition where no heat generated within the wall is lost to the outside of the chamber.
(b) What are the temperatures at the wall boundaries, T(0) and T(L), for the conditions of part (a)?

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, viicborella

Steel is coated with a thin layer of ceramic to protect against corrosion. what do you expect to happen to the coating when the temperature of the steel is increased significantly? explain.

Answers: 1

continue

Engineering, 04.07.2019 18:10, soreese02

An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature

Answers: 2

continue

Engineering, 04.07.2019 18:20, xcapo1x

Refrigerant-134a enters the compressor of a refrigerator as superheated vapor at 0.14 mpa and -10°c at a rate of 0.05 ka/s and leaves at 0.8 mpa and 50°c. the refrigerant is cooied in the condenser to 0.72 mpa and 26'c. it is then throttled to 0.15 mpa. sketch the t-s diagram for the system and evaluate: 6) the rate of heat removai from the refrigerated space (kw), it) the power input to the compressor (kw), ii) the isentropic efficiency of the compressor (%), and iv) the cop of the refrigerator.

Answers: 2

continue

Engineering, 04.07.2019 18:20, Doogsterr

For each of the following process: a) sketch the p-v diagram, b)sketch t-s diagram, c) sketch t-v diagram, d) sketch the boundary work on one of the diagrams (a, b or c) and e) sketch the reversible heat transfer on one of the diagrams (a, b or c): 1- isobaric process from compressed liquid to superheated vapor 2- isothermal process from compressed liquid to superheated vapor 3- isentropic process from compressed liquid to superheated vapor

Answers: 3

continue

Do you know the correct answer?

The air inside a chamber at T[infinity],i = 50 °C is heated convectively with hᵢ= 20 W/m² K by a 200...