Engineering, 29.02.2020 02:48, yasdallasj

Compute changeA cashier distributes change using the maximum number of five dollar bills, followed by one dollar bills. Given amountToChange, assign numFives and numOnes with the number of five dollar and one dollar bills distributed. Hint: Use / and mod, and a rounding function. numFives and numOnes should be integer values. Ex: If amountToChange is 19, then numFives is 3 and numOnes is 4.function [numFives, numOnes] = ComputeChange(amountToChange)% amountToChange: Amount of change in dollars% Assign numFives with the number of five dollar bills distributednumFives = 0;% Assign numOnes with number of one dollar bills distributednumOnes = 0;end

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 16:10, Arealbot

The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.

Answers: 1

continue

Engineering, 04.07.2019 18:10, keigleyhannah30

Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.

Answers: 3

continue

Engineering, 04.07.2019 18:10, selenamr

Ifa component is made of two or more materials with different modulus of elasticity (e), it is called a composite member and we calculate the factor·n". mention the formula for calculating n". also, ifn> 1, explain what will happen to the 1. transformed. gi) ifn 1, what will happen to the material when transformed material when

Answers: 1

continue

Engineering, 04.07.2019 18:20, krojas015

Asolid cylinder is concentric with a straight pipe. the cylinder is 0.5 m long and has an outside diameter of 8 cm. the pipe has an inside diameter of 8.5 cm. the annulus between the cylinder ad the pipe contains stationary oil. the oil has a specific gravity of 0.92 and a kinematic viscosity of 5.57 x 10-4 m2/s. most nearly, what is the force needed to move the cylinder along the pipe at a constant velocity of 1 m/s?

Answers: 3

continue

Do you know the correct answer?

Compute changeA cashier distributes change using the maximum number of five dollar bills, followed b...