Write a new ARMv8 assembly file called "lab04b. S" which is called by your main function. It should have the following specifications: Create a function that computes factorials: n! = n · (n − 1) · ... · 3 · 2 · 1. Use the my_mul function in question 1 for all multiplications Use the concept of recursion. Do NOT directly use the concept of iteration. Do not forget that using the recursion is the same as using the STACK. Make sure you comment on the code. Demonstrate your code running to the TA. Turn in your lab04b. S file here when complete.

Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false

Which of the following ziegler nichols tuning methods the response of the controller to a step input should exhibit an s-shaped curve? a)-open loop mode b)-closed loop mode c)-both modes (open & closed) d)-none of the modes (open & closed)

Ashielded metal arc-welding operation is accomplished in a work cell by a fitter and a welder. the fitter takes 5.5 min to load components into the welding fixture at the beginning of the work cycle, and 1.5 min to unload the completed weldment at the end of the cycle. the total ength of the weld seams 1200 mm, and the travel speed used by the welder averages 300 mm/min. every 600 mm of seam length, the welding stick must be changed, which takes 0.8 min. while the fitter is working, the welder is idle (resting): and while the welder is working the fitter is idle. (a) determine the average arc-on time as a fraction of the work cycle time. (b) how much improvement in arc-on time would result if the welder used flux-cored arc welding (manually operated), given that the spool of weld wire must be changed every 10 weldments, and it takes the welder 5.0 min to accomplish the change? (c) what are the production rates for these two cases (weldments completed per hour)? attach your work and solutions.