Engineering
Engineering, 28.02.2020 00:43, yulimariu27

Use MultiSim transient analysis to simulate the circuit in the time domain using a sine wave input with an amplitude of 5 V and a frequency of 10 kHz, with capacitor =47 pF and the resistor. From the MultiSim output plot of the input and output waveforms, confirm that this circuit is an integrator.

answer
Answers: 2

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 16:10, TheOriginalMeyah
An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)
Answers: 2
image
Engineering, 04.07.2019 18:10, qwertylol12345
Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.
Answers: 2
image
Engineering, 04.07.2019 18:10, namira16
Which of the following controllers anticipates the future from the slope of errors over time? a)-proportional b)-on/off c)-integral d)-derivative.
Answers: 2
image
Engineering, 04.07.2019 18:20, xcapo1x
Refrigerant-134a enters the compressor of a refrigerator as superheated vapor at 0.14 mpa and -10°c at a rate of 0.05 ka/s and leaves at 0.8 mpa and 50°c. the refrigerant is cooied in the condenser to 0.72 mpa and 26'c. it is then throttled to 0.15 mpa. sketch the t-s diagram for the system and evaluate: 6) the rate of heat removai from the refrigerated space (kw), it) the power input to the compressor (kw), ii) the isentropic efficiency of the compressor (%), and iv) the cop of the refrigerator.
Answers: 2
Do you know the correct answer?
Use MultiSim transient analysis to simulate the circuit in the time domain using a sine wave input w...

Questions in other subjects:

Konu
Mathematics, 13.01.2021 18:20
Konu
Mathematics, 13.01.2021 18:20
Konu
Mathematics, 13.01.2021 18:20