Engineering, 27.02.2020 21:40, lilpeepxliltracy

One cycle of the power dissipated by a resistor (R=800 Ω) is given by

P(t)=0.03125 W, 0≤t<12.0 sP(t)=0.03125 W, 0≤t<12.0 s
P(t)=0 W, 12.0≤t<30 sP(t)=0 W, 12.0≤t<30 s
This periodic signal repeats in both directions of time.
What is the amplitude of the PWM voltage signal applied across the 800-Ω resistor?

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, viicborella

Steel is coated with a thin layer of ceramic to protect against corrosion. what do you expect to happen to the coating when the temperature of the steel is increased significantly? explain.

Answers: 1

continue

Engineering, 04.07.2019 18:10, yasminothman02

An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet

Answers: 3

continue

Engineering, 04.07.2019 18:10, heidiburgos1own6c0

Fluids at rest possess no flow energy. a)- true b)- false

Answers: 3

continue

Engineering, 04.07.2019 18:10, anna22684

Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.

Answers: 2

continue

Do you know the correct answer?

One cycle of the power dissipated by a resistor (R=800 Ω) is given by

P(t)=0.03125 W, 0≤...