Engineering, 27.02.2020 04:54, kelebsessoms89
A 30cm long field sample is tested in a falling head permeameter with a 10 cm diameter cylinder. the diameter of the tube is 10mm. the water level in the tube is 35cm above the outlet level after one hour of operation, while the level drops to 22cm after 12 hours of operation. find the hydraulic conductivity of the sample.
Answers: 2
Engineering, 03.07.2019 15:10, EmilySerna
Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.
Answers: 1
Engineering, 04.07.2019 18:10, caitlynnpatton1208
Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.
Answers: 3
Engineering, 04.07.2019 18:10, wirchakethan23
Hydraulic fluid with a sg. of 0.78 is flowing through a 1.5 in. i. d. pipe at 58 gal/min. the fluid has an absolute viscosity of 11.8 x 105 lbf-sec/ft2. is the flow laminar, turbulent or within the critical range? give both a numerical reynolds number and a term answer.
Answers: 3
A 30cm long field sample is tested in a falling head permeameter with a 10 cm diameter cylinder. the...
Arts, 26.09.2021 06:00
Mathematics, 26.09.2021 06:00
Mathematics, 26.09.2021 06:00
English, 26.09.2021 06:00
Physics, 26.09.2021 06:00
Geography, 26.09.2021 06:00
Physics, 26.09.2021 06:00