Engineering
Engineering, 26.02.2020 20:42, kyllow5644

Four kilograms of carbon monoxide (CO) is contained in a rigid tank with a volume of 1 m3. The tank is fitted with a paddle wheel that transfers energy to the CO at a constant rate of 14 W for 1 h. During the process, the specific internal energy of the carbon monoxide increases by 10 kJ/kg. If no overall changes in kinetic and potential energy occur, determine: (a) the specific volume of the carbon monoxide at the final state, in m3/kg. (b) the energy transfer by work from the carbon monoxide, in kJ. (c) the energy transfer by heat transfer to the carbon monoxide, in kJ.

answer
Answers: 3

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:20, safiyabrowne7594
Ahe-xe mixture containing a 0.75 mole fraction of helium is used for cooling electronics in an avionics application. at a temperature of 300 k and atmospheric pressure, calculate the mass fraction of helium and the mass density, molar concentration and molecular weight of the mixture. if the cooling capacity is 10 l, what is the mass of the coolant?
Answers: 3
image
Engineering, 04.07.2019 18:20, luisgonz5050
Find the kinematic pressure of 160kpa. for air, r-287 j/ kg k. and hair al viscosity of air at a temperature of 50°c and an absolute (10 points) (b) find the dynamic viscosity of air at 110 °c. sutherland constant for air is 111k
Answers: 3
image
Engineering, 04.07.2019 18:20, xcapo1x
Refrigerant-134a enters the compressor of a refrigerator as superheated vapor at 0.14 mpa and -10°c at a rate of 0.05 ka/s and leaves at 0.8 mpa and 50°c. the refrigerant is cooied in the condenser to 0.72 mpa and 26'c. it is then throttled to 0.15 mpa. sketch the t-s diagram for the system and evaluate: 6) the rate of heat removai from the refrigerated space (kw), it) the power input to the compressor (kw), ii) the isentropic efficiency of the compressor (%), and iv) the cop of the refrigerator.
Answers: 2
image
Engineering, 04.07.2019 19:10, alex6toes
What are the major differences between injection molding and extrusion?
Answers: 2
Do you know the correct answer?
Four kilograms of carbon monoxide (CO) is contained in a rigid tank with a volume of 1 m3. The tank...

Questions in other subjects:

Konu
History, 13.05.2021 09:30
Konu
Spanish, 13.05.2021 09:30
Konu
Computers and Technology, 13.05.2021 09:30