Engineering, 26.02.2020 04:54, karlaperez6852
One of the main factors driving improvements in the cost and complexity of integrated circuits (ICs) is improvements in photolithography and the resulting ability to print ever smaller features. Modern circuits are made using a variety of complicated lithography techniques, with the goal to make electronic traces as small and as close to each other as possible (to reduce the overall size, and thus increase the speed). In the end though, all optical techniques are limited by diffraction.
Assume we have a scannable laser that draws a line on a circuit board. Assume the laser wavelength is 248 nm (Krypton Fluoride excimer laser), the initial beam diameter is 1 cm, and the focusing lens (diameter 1.3 cm) is extremely fast', with a focal length of only 0.625 cm.
What is the approximate width w of the line (defined here as the distance between diffraction minima on either side of the central spot/ridge)?
Answers: 1
Engineering, 04.07.2019 18:10, hadellolo8839
Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false
Answers: 3
Engineering, 04.07.2019 18:10, michellerosas
Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.
Answers: 3
One of the main factors driving improvements in the cost and complexity of integrated circuits (ICs)...
Mathematics, 30.12.2019 23:31
Mathematics, 30.12.2019 23:31
French, 30.12.2019 23:31
Mathematics, 30.12.2019 23:31
Mathematics, 30.12.2019 23:31