Engineering, 26.02.2020 04:18, einstein101

Two metal blocks of equal mass M of the same substance, one at an initial temperature T1i and the other at an initial temperature T2i , are placed in a well-insulated (adiabatic) box of constant volume. A device that can produce work from a flow of heat across a temperature difference (i. e., a heat engine) is connected between the two blocks.
Develop expressions for the maximum amount of work that can be obtained from this process and the common final temperature of the blocks when this amount of work is obtained. You may assume that the heat capacity of the blocks does not vary with temperature.

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 19:30, 10040813

When using the ohmmeter function of a digital multimeter, the leads are placed in what position relative to the component being tested? a. parallel b. control c. series d. line

Answers: 3

continue

Engineering, 04.07.2019 18:10, demarcuswiseman

Calculate the bore of a cylinder that has a stroke of 18 inches and an extension time of 6 seconds at a flow rate of 4 gal/min.

Answers: 3

continue

Engineering, 04.07.2019 18:20, aly95

An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid

Answers: 3

continue

Engineering, 04.07.2019 18:20, Doogsterr

For each of the following process: a) sketch the p-v diagram, b)sketch t-s diagram, c) sketch t-v diagram, d) sketch the boundary work on one of the diagrams (a, b or c) and e) sketch the reversible heat transfer on one of the diagrams (a, b or c): 1- isobaric process from compressed liquid to superheated vapor 2- isothermal process from compressed liquid to superheated vapor 3- isentropic process from compressed liquid to superheated vapor

Answers: 3

continue

Do you know the correct answer?

Two metal blocks of equal mass M of the same substance, one at an initial temperature T1i and the ot...