Engineering, 25.02.2020 00:10, jonquil201
(a) (2 pts) Given an RF pulse with a bandwidth of 1000 Hz (this is f, not omega) centered at the Larmor frequency for a 2.0 Tesla field, what slice select gradient strength is needed in order to excite a 2-mm slice in a homogeneous water phantom?
Answers: 2
Engineering, 04.07.2019 18:10, keigleyhannah30
Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.
Answers: 3
Engineering, 04.07.2019 18:20, rjone8429
Asimple rankine cycle uses water as the working fluid. the water enters the turbine at 10 mpa and 480c while the condenser operates at 6 kpa. if the turbine has an isentropic efficiency of 80 percent while the pump has an isentropic efficiency of 70 percent determine the thermal efficiency
Answers: 1
Engineering, 04.07.2019 18:20, AnonymousLizard52303
A2-m rigid tank initially contains saturated water vapor at 100 kpa. the tank is connected to a supply line through a valve. steam is flowing in the supply line at 600 kpa and 300 c. the valve is opened, and steam is allowed to enter the tank until the pressure in the tank reaches the line pressure, at which point the valve is closed. a thermometer placed in the tank indicates that the temperature at the final state is 200°c. determine (a) the mass of steam that has entered the tank (b) the amount of heat transfer.
Answers: 3
(a) (2 pts) Given an RF pulse with a bandwidth of 1000 Hz (this is f, not omega) centered at the Lar...
Mathematics, 29.05.2021 08:50
Mathematics, 29.05.2021 08:50
Geography, 29.05.2021 08:50