Engineering, 24.02.2020 20:59, babyE805
A 20-mm thick draw batch furnace front is subjected to uniform heat flux on the inside surface, while the outside surface is subjected to convection and radiation heat transfer. Assuming that (1) heat conduction is steady; (2) one dimensional heat conduction across the furnace front thickness; (3) Thermal properties are constant; (4) inside and outside surface temperatures are constant
Answers: 3
Engineering, 04.07.2019 18:10, niyawilliams23
Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10
Answers: 1
Engineering, 04.07.2019 19:10, shayshay7874
An electric kettle is made out of stainless steel, weighs two pounds (when empty) and is equipped with a heating element that consumes 2 kw of electricity. assuming that the water and the kettle are at the same uniform temperature at any moment of time, calculate the shortest possible time to bring 2 quarts of water from room temperature to the onset of boiling
Answers: 2
A 20-mm thick draw batch furnace front is subjected to uniform heat flux on the inside surface, whil...
English, 20.09.2020 07:01
Advanced Placement (AP), 20.09.2020 07:01
Mathematics, 20.09.2020 07:01