Engineering, 24.02.2020 16:55, SavyBreyer

Your cement company manufactures a cement with the following composition: 55% C3S, 18% C2S, 10% C3A, 8% C4AF, and 6% CŜH2 with a Blaine fineness of 365 m2 /kg. a. A customer has complained that the 1-day strengths are low. List 2 things you can change in your production to address this and what the consequences of those two things are on the composition and properties listed above. b. Which of the two changes in (a) are you more likely to implement, and why? c. All of a sudden there is a high demand for gypsum and the price has skyrocketed. What can you do to your cement to reduce the amount of gypsum needed? What would a potential consequence of this change be?

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, viicborella

Steel is coated with a thin layer of ceramic to protect against corrosion. what do you expect to happen to the coating when the temperature of the steel is increased significantly? explain.

Answers: 1

continue

Engineering, 06.07.2019 02:30, heavenwagner

A12 mm diameter shaft runs in a plain cylindrical bush 30 mm long that is located in an 18 mm diameter hole in a housing. the shaft-inner bush fit is h8 f and the outer bush-housing fit is h7-p6. make a fully cimensioned sketch of the bush with tolerances. find the maximum and minimum clearance or interference for both fits on the inner and outer diameters of the bush

Answers: 3

continue

Engineering, 06.07.2019 03:10, DeathFightervx

Air is flows through an adiabatic nozzle with an inlet pressure of 400 psia at a temperature of 300°f and a velocity of 20 ft/s. the outlet pressure is 40 psia and the velocity is 800 ftl/s. determine the outlet temperature of the air using: a) property tables b) specific heat (using the specific heat value for air at 300°f)

Answers: 3

continue

Engineering, 06.07.2019 03:20, mardell2587

Acountershaft is supported by two tapered roller bearings using indirect mounting. the radial bearing loads are 1120 lb for the left-hand bearing and 2190 lb for the right-hand bearing. the shaft rotates at 400 rpm and is to have an l10 life of 40,000 hours and an application factor of 1.4. assume ka2k 15, and find the required radial rating of each bearing

Answers: 3

continue

Do you know the correct answer?

Your cement company manufactures a cement with the following composition: 55% C3S, 18% C2S, 10% C3A,...