Engineering
Engineering, 22.02.2020 02:25, vegetavigitop4l0r0

Consider the following specification of a Turing machine that, when placed on the leftmost letter of a string of a's and b's (where the end of the string is marked by an 'x' -- think of 'x' as denoting a blank cell on the tape), detects whether that string is a palindrome.

We will write down the transition function in the following format:

(s, i) -> (s', w, d)

This would mean that if the Turing machine is in state s, and the current cell under the read/write head contains symbol i, then it changes to state s', writes w on the cell, and then moves the head in the d direction. In the instructions below, L and R stand for left and right directions, and the states are the numbers 0 through 7.

Note: The comments after the transition rules (text between /* and */) are just comments to help explain in conceptual terms what the Turing machine is "doing" when in different states. The actual functioning of the Turing machine is completely determined by the transition rules themselves.

CO, a) - (1,x, R) State 0 (start state) */ C0,b) - (2,x, R) CO, x) -> C5,x, L) (1,a) -> (1,a, R) /*Seen an askip to right end of the input to look for match* (2,a) -> (2,a, R) /*Seen a b; skip to right end of the input to look for match* (3,a) -> (7,x, L) Test right end for a * (3,x) -> C5,x, L) (4,a) -> (6,a, L) Test right end for b */ C4,b) - (7,x, L) C4,x) -> C5,x, L) 5,* ->halt (6,*) ->halt Found a palindrome* /* Did not find a palindrome */ (7,a) -> (7,a, L) Found a match at the right end; return to left end of input (7,x) -> C0,x, R)

Suppose that the machine starts with the following sequence of symbols on its input tape: a b a b x x x . . . Assume that the machine starts with the read/write head on the leftmost non-blank cell (so it is reading the first "a"), and starts in state 0.

If this Turing machine executes on this input:

A) What is the sequence of states that it will enter? Show your work. (Note: You should enter one state number for each step of the computation. The machine may enter the same state twice or more--you should still list that state each time it is entered.)

B) What are the contents of the tape at the end of the execution?

answer
Answers: 3

Other questions on the subject: Engineering

image
Engineering, 03.07.2019 14:10, kayabwaller4589
When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point
Answers: 3
image
Engineering, 03.07.2019 14:10, BardiFan
Amass of m 1.5 kg of steam is contained in a closed rigid container. initially the pressure and temperature of the steam are: p 1.5 mpa and t 240°c (superheated state), respectively. then the temperature drops to t2= 100°c as the result of heat transfer to the surroundings. determine: a) quality of the steam at the end of the process, b) heat transfer with the surroundings. for: p1.5 mpa and t 240°c: enthalpy of superheated vapour is 2900 kj/kg, specific volume of superheated vapour is 0. 1483 m/kg, while for t 100°c: enthalpy of saturated liquid water is 419kj/kg, specific volume of saturated liquid water is 0.001043m/kg, enthalpy of saturated vapour is 2676 kj/kg, specific volume of saturated vapour is 1.672 m/kg and pressure is 0.1 mpa.
Answers: 3
image
Engineering, 04.07.2019 16:10, Arealbot
The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.
Answers: 1
image
Engineering, 04.07.2019 18:10, ahmedeldyame
Aloaded platform of total mass 500 kg is supported by a dashpot and by a set of springs of effective stiffness 72 kn/m. it is observed that when the platform is depressed through a distance x = 12.5 cm below its equilibrium position and then released without any initial velocity; it reaches its equilibrium position in the shortest possible time without overshoot. find the position and velocity of the loaded platform 0.10 sec. after its release. if a further load of 400 kg is added to the platform, find, i) the frequency of damped vibrations, and i) the amplitude of vibration after 2 complete oscillations, given that the initial amplitude is 15 cm.
Answers: 1
Do you know the correct answer?
Consider the following specification of a Turing machine that, when placed on the leftmost letter of...

Questions in other subjects:

Konu
Health, 21.11.2020 01:30
Konu
Biology, 21.11.2020 01:30
Konu
Mathematics, 21.11.2020 01:30
Konu
Mathematics, 21.11.2020 01:30