A steel tank contains hydrogen at 15 atm pressure at room temperature. If the solubility of hydrogen in steel is 1×10−2 g/cm3 at this pressure, the diffusion coefficient is 8×10−5 cm2/s at this temperature, and the tank is placed in a vacuum, calculate the flux of hydrogen through a 3.5 mm-thick wall.

Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.

Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.

Which one from below is not one of the reasons of planning failures? (clo3) a)-planner is careless. b-planner spend less time in the field but more time on the desk c)-planner is not qualified d)-planner does not have sufficient time to properly plan