Engineering
Engineering, 21.02.2020 18:34, Jerrygordon212

For each of the following combinations of parameters, determine if the material is a low-loss dielectric, a quasi-conductor, or a good conductor, and then calculate α,β,λ,up, and ηc:(a)Glass with μr=1,εr=5, andσ=10−12S/m at 10 GHz.(b)Animal tissue with μr=1,εr=12, and σ=0.3 S/m at 100 MHz.(c)Wood with μr=1,εr=3, and σ=10−4S/m at 1 kHz

answer
Answers: 1

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, hadellolo8839
Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false
Answers: 3
image
Engineering, 04.07.2019 18:10, xboxdude06
Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.
Answers: 1
image
Engineering, 04.07.2019 18:20, hayleymckee
Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent
Answers: 2
image
Engineering, 04.07.2019 18:20, mjcbs21
What is the heat treatment of metals? what is the benefit of it? why and how it's useful? answer in details, do not write by hand.
Answers: 3
Do you know the correct answer?
For each of the following combinations of parameters, determine if the material is a low-loss dielec...

Questions in other subjects:

Konu
Social Studies, 26.01.2020 11:31
Konu
History, 26.01.2020 11:31
Konu
Biology, 26.01.2020 11:31
Konu
History, 26.01.2020 11:31