Engineering
Engineering, 21.02.2020 18:02, shatj960

A cuboid of Ge has contacts over all of its 2mm × 1 mm ends and point contacts approximately half way along its 5 mm length, at the centre of the 5 mm × 1 mm faces. A magnetic field can be applied parallel to this face. A current of 5 mA is passed between the end contacts when a voltage of 310 mV is applied. This generates a voltage across the point contacts of 3.2 mV with no magnetic field and 8.0 mV when a field of 0.16 T is applied.

ii. Using the corrected Hall voltage find the carrier density in the Ge sample.

iii. Estimate the conductivity of the Ge.

iv. What is the mobility of the carriers?

ANSWERS:

ii) 1.04e21 m^-3

iii) 40.3 s/m

iv) 0.24 m^2/V*s

answer
Answers: 3

Other questions on the subject: Engineering

image
Engineering, 03.07.2019 15:10, EmilySerna
Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.
Answers: 1
image
Engineering, 04.07.2019 18:10, yasminothman02
An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet
Answers: 3
image
Engineering, 04.07.2019 18:10, Tyrant4life
Draw the engineering stress-strain curve for (a) bcc; (b) fcc metals and mark important points.
Answers: 1
image
Engineering, 04.07.2019 18:20, maustin5323
Athin walled concentric tube exchanger is used to cool engine oil from 160°c to 60°c with water that is available at 25°c acting as a coolant. the oil and water flow rates are each at 2 kg/s, and the diameter of the inner tube is 0.5 m and the corresponding value of the overall heat transfer coefficient is 250 w/m2. oc. how long must the heat exchanger be to accomplish the desired cooling? cpwater=4.187 kj/kg-candcpengine el=2.035 kj/kg·°c, oil . 120]
Answers: 1
Do you know the correct answer?
A cuboid of Ge has contacts over all of its 2mm × 1 mm ends and point contacts approximately half wa...

Questions in other subjects: