Engineering, 21.02.2020 04:58, samueldfhung
A displacement field is given in terms of scalar components by: u = 2 xż, uz = az, Uz = 23X2X3, where az, az, az are positive constants. a) Find the infinitesimal strain tensor.
Answers: 3
![\left[\begin{array}{ccc}0&a_1x_2&0\\a_1x_2&0&\frac{a_3x_3}{2}\\0&\frac{a_3x_3}{2}&a_3x_2\end{array}\right]](/tpl/images/0518/8816/cca4e.png)
![\epsilon=\left[\begin{array}{ccc}\epsilon_{11}&\epsilon_{12}&\epsilon_{13}\\\epsilon_{21}&\epsilon_{22}&\epsilon_{23}\\\epsilon_{31}&\epsilon_{32}&\epsilon_{33}\end{array}\right]](/tpl/images/0518/8816/95e7e.png)
![\epsilon=\left[\begin{array}{ccc}0&a_1x_2&0\\a_1x_2&0&\frac{a_3x_3}{2}\\0&\frac{a_3x_3}{2}&a_3x_2\end{array}\right]](/tpl/images/0518/8816/0e8e4.png)
Other questions on the subject: Engineering
Engineering, 03.07.2019 15:10, EmilySerna
Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.
Answers: 1
Engineering, 04.07.2019 18:10, koolgurl2003
Apump is used to circulate hot water in a home heating system. water enters the well-insulated pump operating at steady state at a rate of 0.42 gal/min. the inlet pressure and temperature are 14.7 lbf/in.2, and 180°f, respectively; at the exit the pressure is 60 lbf/in.2 the pump requires 1/15 hp of power input. water can be modeled as an incompressible substance with constant density of 60.58 lb/ft3 and constant specific heat of 1 btu/lb or. neglecting kinetic and potential energy effects, determine the temperature change, in °r, as the water flows through the pump.
Answers: 1
Engineering, 04.07.2019 18:10, skpdancer1605
Ariver flows from north to south at 8 km/h. a boat is to cross this river from west to east at a speed of 20 km/h (speed of the boat with respect to the earth/ground). at what angle (in degrees) must the boat be pointed upstream such that it will proceed directly across the river (hint: find the speed of the boat with respect to water/river)? a 288 b. 21.8 c. 326 d. 30.2
Answers: 3
Engineering, 04.07.2019 18:20, aly95
An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid
Answers: 3
Do you know the correct answer?
A displacement field is given in terms of scalar components by: u = 2 xż, uz = az, Uz = 23X2X3, wher...
Questions in other subjects:
Health, 09.04.2020 23:30
Mathematics, 09.04.2020 23:30
Mathematics, 09.04.2020 23:30
English, 09.04.2020 23:30
