Engineering, 21.02.2020 04:34, coreen9

A metal bar has a 0.6 in. x 0.6 in. cross section and a gauge length of 2 in. The bar is loaded with a tensile force of 50,000 lb. Under this force, the bar elastically deforms so that the gauge length increases to 2.007 in. and the cross section decreases to 0.599 in. x 0.599 in. Determine the modulus of elasticity and Poisson’s ratio for this metal.

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, aliceohern

The y form of iron is known as: a) ferrite b) cementite c) perlite d) austenite

Answers: 3

continue

Engineering, 03.07.2019 14:10, bryneosburn

Line joining liquid phase with liquid and solid phase mixture is known as: a) liquidus b) solidus c) tie line d) none of the mentioned

Answers: 2

continue

Engineering, 04.07.2019 03:10, lauriepdx17

What precautions should you take to prevent injuries when dealing with heavy loads?

Answers: 1

continue

Engineering, 04.07.2019 18:10, tjeffers90028

Refrigerant 134a enters an insulated compressor operating at steady state as saturated vapor at -26°c with a volumetric flow rate of 0.18 m3/s. refrigerant exits at 9 bar, 70°c. changes in kinetic and potential energy from inlet to exit can be ignored. determine the volumetric flow rate at the exit, in m3/s, and the compressor power, in kw.

Answers: 1

continue

Do you know the correct answer?

A metal bar has a 0.6 in. x 0.6 in. cross section and a gauge length of 2 in. The bar is loaded with...