Engineering, 20.02.2020 22:52, dondre54

Steam flowing through a long, thin-walled pipe maintains the pipe wall at uniform temperature of 500K. The pipe is covered with an insulated blanket (orange area in the schematic below). The outer surface of the blanket is exposed to air at 300K. The heat transfer coefficient of the air is assumed to be at 25W/m²/K. r = 50 mm -r2 = 100 mm -k = 0.25 W/m•K 1 Toh T3,1 = 500 K (a) Sketch the thermal circuit of the system. Label all pertinent nodes (using the preceding symbols) and the resistances. (10 pts) (b) What is the heat loss rate per unit length from the pipe? (10 pts) (c) What is the temperature of the outer surface of the blanket (Ts, 2)?

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, kayabwaller4589

When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point

Answers: 3

continue

Engineering, 04.07.2019 16:10, Arealbot

The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.

Answers: 1

continue

Engineering, 04.07.2019 18:20, moneywaydaedae

Air is compressed isentropically from an initial state of 300 k and 101 kpa to a final temperature of 1000 k. determine the final pressure using the following approaches: (a) approximate analysis (using properties at the average temperature) (b) exact analysis

Answers: 1

continue

Engineering, 04.07.2019 18:20, RiverH246

Air flows over a heated plate àt a velocity of 50m/s. the local skin factor coefficient at a point on a plate is 0.004. estimate the local heat transfer coefficient at this point. the following property data for air are given: density = 0.88kg/m3 , viscosity 2.286 x 10 ^-5 kgm/s , k = 0.035w/mk ,cp = 1.001kj/kgk. use colburn reynolds analogy.

Answers: 1

continue

Do you know the correct answer?

Steam flowing through a long, thin-walled pipe maintains the pipe wall at uniform temperature of 500...