Engineering, 20.02.2020 08:50, querty2400

A pair of mating gears have 20 degrees full-depth teeth with a diametral pitch of 8. Both gear and pinion are made of steel heat-treated to 350 Bhn, and both have a face width of 1 in. The teeth are cut with a top quality hobbing operation. The pinion has 20 teeth and rotates 1100 rpm. It is mounted outboard on the shaft of an eletric motor, and drives a 40-tooth gear that is positioned inboard on an accurately mounted blower shaft. The design life corresponds to 5 years of 60 hours/week, 50 weeks/year operation. Using a reliability of 99% and a safety factor of 1.5, estimate the horsepower that can be transmitted, based only on bending fatigue.

3. To what value could the gear hardness be reduced in Problem 2 without making the gear teeth weaker than the pinion teeth in bending fatigue?

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, cowgyrlup124

Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.

Answers: 1

continue

Engineering, 04.07.2019 18:10, siri5645

At 12 noon, the count in a bacteria culture was 400; at 4: 00 pm the count was 1200 let p(t) denote the bacteria cou population growth law. find: (a) an expression for the bacteria count at any time t (b) the bacteria count at 10 am. (c) the time required for the bacteria count to reach 1800.

Answers: 1

continue

Engineering, 04.07.2019 18:10, agpraga23ovv65c

Carbon dioxide gas expands isotherm a turbine from 1 mpa, 500 k at 200 kpa. assuming the ideal gas model and neglecting the kinetic and potential energies, determine the change in entropy, heat transfer and work for each kilogram of co2.

Answers: 2

continue

Engineering, 04.07.2019 18:10, samanthabutryn

Which one from below is not one of the reasons of planning failures? (clo3) a)-planner is careless. b-planner spend less time in the field but more time on the desk c)-planner is not qualified d)-planner does not have sufficient time to properly plan

Answers: 3

continue

Do you know the correct answer?

A pair of mating gears have 20 degrees full-depth teeth with a diametral pitch of 8. Both gear and p...