Engineering, 20.02.2020 06:59, kevinh2683
A voltage amplifier with an input resistance of 20 kohms, an ouput resistance of 100 ohms, and a gain of 1000 V/V is connected between a 100 kohm source with an open circuit voltage of 10 mV and a 100 ohm load. For this situation:
(a) What output voltage results?
(b) What is the voltage gain from source to load?
(c) What is the voltage gain from the amplifier input to the load?
(d) If the output voltage across the load is twice that needed and there are signs of internal amplifier overload, suggest the location and value of a single resistor that would produce the desired output.
Answers: 3
Engineering, 04.07.2019 18:10, viicborella
Steel is coated with a thin layer of ceramic to protect against corrosion. what do you expect to happen to the coating when the temperature of the steel is increased significantly? explain.
Answers: 1
Engineering, 04.07.2019 18:10, niicoleassssssf
Aflywheel accelerates for 5 seconds at 2 rad/s2 from a speed of 20 rpm. determine the total number of revolutions of the flywheel during the period of its acceleration. a.5.65 b.8.43 c. 723 d.6.86
Answers: 2
Engineering, 04.07.2019 18:10, keigleyhannah30
Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.
Answers: 3
A voltage amplifier with an input resistance of 20 kohms, an ouput resistance of 100 ohms, and a gai...
Mathematics, 25.02.2021 15:20
SAT, 25.02.2021 15:20
Geography, 25.02.2021 15:20
Arts, 25.02.2021 15:20
Mathematics, 25.02.2021 15:20