Engineering, 20.02.2020 06:58, mauifrifer3986

A rigid bar ABCD is pinned at A and supported by two steel rods connected at B and C, as shown. There is no strain in the vertical rods before load P is applied. After load P is applied, the normal strain in rod (2) is 800 με. Determine : (ajthe axial normal strain in rod (1). b)the axial normal strain in rod (1) if there is a 1 mm gap in the connection between the rigid bar and rod (2) before the load is applied. 2.7 m 1.5 m Rigid bar 2.5 m

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, kayabwaller4589

When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point

Answers: 3

continue

Engineering, 04.07.2019 18:10, colin774

The higher the astm grain size number, the finer the gran is. a)-true b)-false

Answers: 2

continue

Engineering, 04.07.2019 18:10, Candi9697

A-mn has a cubic structure with a0 0.8931 nm and a density of 7.47 g/cm3. b-mn has a different cubic structure, with a0 0.6326 nm and a density of 7.26 g/cm3. the atomic weight of manganese is 54.938 g/mol and the atomic radius is 0.112 nm. determine the percent volume change that would occur if a-mn transforms to b-mn.

Answers: 2

continue

Engineering, 04.07.2019 18:10, mirmir62

Machinery that is a key part of the process and without which the plant or process cannot function is classifed as: (clo4) a)-critical machinery b)-essential machinery c)-general purpose machinery d)-none of the specified options.

Answers: 1

continue

Do you know the correct answer?

A rigid bar ABCD is pinned at A and supported by two steel rods connected at B and C, as shown. Ther...