Engineering
Engineering, 19.02.2020 02:28, garciazzzz6

Carbon resistors often come as a brown cylinder with colored bands. These colored bands can be read to determine the manufacturer's target resistance value. The first two bands (L and M) represent the number. The third band (N) represents the order of magnitude - basically how many zeros to add. The fourth band (S) represents a tolerance. A tolerance of 5% (gold band) means that most resistors will fall within 5% of the labeled value. A silver band represents 10% and no color represents 20%.Black 0brown 1red 2orange 3yellow 4green 5blue 6violet 7gray 8white 9Green (5), Red (2), Red (2) with a silver band would represent a resistor with a resistance of 52e2 ohms, which is 5200 ohms or 5.2 kohms. The tolerance would be 10%.What would be the resistance and tolerance for the following two cases?a) Yellow, Violet, Red, Gold:b) Red, Black, Green, nothing:

answer
Answers: 3

Other questions on the subject: Engineering

image
Engineering, 03.07.2019 14:10, BardiFan
Amass of m 1.5 kg of steam is contained in a closed rigid container. initially the pressure and temperature of the steam are: p 1.5 mpa and t 240Ā°c (superheated state), respectively. then the temperature drops to t2= 100Ā°c as the result of heat transfer to the surroundings. determine: a) quality of the steam at the end of the process, b) heat transfer with the surroundings. for: p1.5 mpa and t 240Ā°c: enthalpy of superheated vapour is 2900 kj/kg, specific volume of superheated vapour is 0. 1483 m/kg, while for t 100Ā°c: enthalpy of saturated liquid water is 419kj/kg, specific volume of saturated liquid water is 0.001043m/kg, enthalpy of saturated vapour is 2676 kj/kg, specific volume of saturated vapour is 1.672 m/kg and pressure is 0.1 mpa.
Answers: 3
image
Engineering, 04.07.2019 19:10, Destinationz
Asteam is contained in a rigid tank with a volume of 1 m3. initially, the pressure and temperature are 7 bar and 500 oc, respectively. the temperature drops due to cooling process. determine: (1) the temperature at which condensation begins in Ā°c, (2) the fraction of the total mass that has condensed when the pressure decreased to 0.5 bar. (3) the volume in m3 occupied by saturated liquid at the final state?
Answers: 3
image
Engineering, 04.07.2019 19:10, netflixacc0107
What is the major difference between thermoplastics and thermosetting plastics from the polymerization structure point of view?
Answers: 2
image
Engineering, 04.07.2019 19:10, shunna33
Plan an experiment to measure the surface tension of a liquid similar to water. if necessary, review the ncfmf video surface tension for ideas. which method would be most suitable for use in an undergraduate laboratory? what experimental precision could be expected?
Answers: 2
Do you know the correct answer?
Carbon resistors often come as a brown cylinder with colored bands. These colored bands can be read...

Questions in other subjects:

Konu
Biology, 13.01.2021 20:40
Konu
Mathematics, 13.01.2021 20:40