Engineering, 19.02.2020 01:50, batmandillon21

Consider a composite wall that includes an 8-mm thick hardwood siding, 40mm by 130mm hardwood studs on .65m centers with glass insulation ( paper faced, 28 kg/m^3) and a 12mm layer of gypsum (vermiculite) wall board.
What is the thermal resistance associated with a wall that is 2.5m high by 6.5m wide ( having 10 studs, each 2.5m high)? Assume surfaces parallel to the x-direstion are adiabatic.

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, kayabwaller4589

When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point

Answers: 3

continue

Engineering, 04.07.2019 03:10, lauriepdx17

What precautions should you take to prevent injuries when dealing with heavy loads?

Answers: 1

continue

Engineering, 04.07.2019 18:10, viicborella

Steel is coated with a thin layer of ceramic to protect against corrosion. what do you expect to happen to the coating when the temperature of the steel is increased significantly? explain.

Answers: 1

continue

Engineering, 04.07.2019 18:10, DestyHilBan1183

Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.

Answers: 3

continue

Do you know the correct answer?

Consider a composite wall that includes an 8-mm thick hardwood siding, 40mm by 130mm hardwood studs...