Engineering, 19.02.2020 01:52, LearningZone

Consider an ideal cogeneration steam plant to generate power and process heat. Steam enters the turbine from the boiler at 7 Mpa and 500 degree C. One-fourth of the steam is extracted from the turbine at 600-kPa pressure for generating 8600 kJ/s of process heat. The remainder of the steam continues to expand and exhausts to the condenser at 10 kPa. The steam extracted for the process heater is condensed in the heater and mixed with the feed-water at 600 kPa and the mixture is pumped to the boiler pressure of 7 Mpa. 1. Show the cycle on a T-s diagram with respect to saturation lines. 2. Determine the fraction fraction of steam that is extracted from the turbine at state 7. 3. Determine the net power produced per kg of steam exiting the boiler. 4. Determine the mass flow rate of steam that must be supplied by the boiler. 5. Determine the net power produced by the plant. 6. Determine the utilization factor.

Answers: 1

Show answers

Answers

answered: meaddestinee

1. The diagram T-s or H-s is attached to this answer.

2. The fraction of the steam extracted is 4.088Kg/s

3. The net Power produced per kg of steam exiting the boiler is 1089.5KJ/Kg.

4. The mass flow rate of steam supplied by the boiler is 16.352Kg/s

5. the net power produced by the plant is 11016.2KJ/s.

6. The utilization factor is 0.218.

Explanation:

To analyze this problem we need to find all the thermodynamic coordinates of the system. In the second image attached to this answer, we can see the entire ideal cogeneration steam plant system.

From a water thermodynamic properties chart, we can obtain the information for each point.

+ Steam enters the turbine from the boiler at 7 Mpa and 500 degrees C:

h₆=3410.56KJ/Kg

s₆=6.7993 KJ/Kg

This is an ideal cogeneration steam system, therefore: s₆=s₇=s₈

+One-fourth of the steam is extracted from the turbine at 600-kPa:

h₇(s₇) = 2773.74 KJ/Kg (overheated steam)

+The remainder of the steam continues to expand and exhausts to the condenser at 10 kPa.

h₈(s₈)=2153.58 KJ/Kg (this is wet steam with title X=0.8198)

h₁(P=10Kpa)= 191.83 KJ/Kg (condensed water) s₁=0.64925KJ/Kg

-This flow is pumped to 600KPa, so:

s₂=s₁

h₂(s₂)=192.585KJ/Kg

+The steam extracted for the process heater is condensed in the heater:

h₃(P=600KPa)=670.42KJ/Kg (condensed water)

+The steam extracted for the process heater is condensed in the heater and mixed with the feed-water at 600 kPa:

The mixing process of the flow of point 2 and 3 is an adiabatic process, therefore:

$\dot{Q}_4=\dot{Q}_2+\dot{Q}_3=\dot{m}_2 h_2+\dot{m}_3h_3\\\dot{m}_4 h_4=\dot{m}_2 h_2+\dot{m}_3h_3=\dot{m}_2 0.75h_4+\dot{m}_30.25h_4\\h_4=0.75h_2+0.25h_3=312.043KJ/Kg$

s₄=1.02252

+the mixture is pumped to the boiler pressure of 7 Mpa:

s₅=s₄

h₅(s₅)=323.685KJ/Kg

1)Now we have all the thermodynamic coordinates and we can draw the diagram of the system.

2) To determine the fraction of steam, the mass flow that is extracted from the turbine at state 7, we use the information that this flow is used to generate 8600KJ/s in a process of heat. Therefore:

$P=8600KJ/s=\dot{m}_{3-7}(h_7-h_3)\\\dot{m}_{3-7}=8600KJ/s/(h_7-h_3)=4.088Kg/s$

3)The net power produced per kg of steam exiting the boiler can be obtained as the rest between all the power obtained in the turbine less the power used in the pumps:

$P_{turb}/Kg=(h_6-h_7)+0.75(h_7-h_8)=1101.94KJ/Kg\\P_{pump1}/Kg=h_2-h_1=0.755KJ/kg\\P_{pump2}/kg=h_5-h_4=11.642KJ/Kg\\P_{net}/kg=P_{turb}-P_{pump1}-P_{pump2}=1089.543KJ/Kg$

4) To determine the mass flow rate of steam that must be supplied by the boiler, we only have to remember that the flow used in point 2) is a fourth of the total flow. therefore:

$0.25\dot{m}_{tot}=\dot{m}_{3-7}\\\dot{m}_{tot}=4\dot{m}_{3-7}=16.352Kg/s$

5)The net power supplied by the plant is the net power calculated in point 3) less the power used in the heat process 7-3:

$P_{net sys}=P_{net}/kg \cdot \dot{m}_t-6800Kj/s=11016.2KJ/s$

6) The utilization factor is obtained as the division between net power supplied by the plant and the power used to heat the steam. In this case:

$UF=P_{net sys}/P_{boil}=P_{net sys}/[\dot{m}_t(h_6-h_5)]=0.21$

Consider an ideal cogeneration steam plant to generate power and process heat. Steam enters the turb

answered: Guest

the clapeyron equation (also called the clausius-clapeyron equation) relates the slope of a reaction line on a phase diagram to fundamental thermodynamic properties.

explanation:

answered: Guest

No clue sorry. just trying to get points to ask my question

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, aliceohern

The y form of iron is known as: a) ferrite b) cementite c) perlite d) austenite

Answers: 3

continue

Engineering, 04.07.2019 08:10, doggo242

Which of the following is an easy way to remember the modified “x” tire rotation? a. nondrive wheels straight, cross the drive wheels b. drive wheels straight, cross the nondrive wheels c. drive wheels crossed, nondrive wheels straight d. drive wheels crossed, nondrive wheels crossed

Answers: 1

continue

Engineering, 04.07.2019 18:10, soreese02

An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature

Answers: 2

continue

Engineering, 04.07.2019 18:10, mamasbug4285

An air compression refrigeration system is to have an air pressure of 100 psia in the brine tank and an allowable air temperature increase of 60°f for standard vapor compression cycle temperatures of 77 f entering the expansion cylinder and 14 f entering the compression cylinder, calculate the coefficient of performance a. 2.5 b 3.3 c. 4.0 d. 5.0

Answers: 3

continue

Do you know the correct answer?

Consider an ideal cogeneration steam plant to generate power and process heat. Steam enters the turb...