Engineering, 18.02.2020 23:56, eve2055

Hot liquid is flowing in a steel pipe with an inner diameter of D, = 22 mm and an outer diameter of D2 = 27 mm. The inner surface of the pipe is coated with a thin fluorinated ethylene propylene (FEP) lining. The thermal conductivity of the pipe wall is 15 W/m. K. The pipe outer surface is subjected to a uniform flux of 1200 W/m2 for a length of 1 m. The hot liquid flowing inside the pipe has a mean temperature of 180°C and a convection heat transfer coefficient of 50 W/m².K. The interface between the FEP lining and the steel surface has a thermal contact conductance of 1500 W/m2.K. a) Determine the temperatures at the lining and at the pipe outer surface for the pipe length subjected to the uniform heat flux. b) What is the total thermal resistance between the two temperatures? c) The ASME Code for Process Piping (ASME B31.3-2014, A323) recommends a maximum temperature for FEP lining to be 204°C. d) Does the FEP lining comply with the recommendation of the code?

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, bryneosburn

Line joining liquid phase with liquid and solid phase mixture is known as: a) liquidus b) solidus c) tie line d) none of the mentioned

Answers: 2

continue

Engineering, 04.07.2019 18:20, samantha636

Avolume of 2.65 m3 of air in a rigid, insulated container fitted with a paddle wheel is initially at 264 k, 5.6 bar. the air receives 432 kj by work from the paddle wheel. assuming the ideal gas model with cv = 0.71 kj/kg • k, determine for the air the amount of entropy produced, in kj/k

Answers: 2

continue

Engineering, 04.07.2019 18:20, cxttiemsp021

Atank with constant volume contains 2.27 kg of a mixture of water phases (liquid-vapor). in the initial state the temperature and the quality are 127 °c and 0.6, respectively. the mixture is heated until the temperature of 160 oc is reached. illustrate the process in a t-v diagram. then, determine (1) the mass of the vapor in kg at the initial state, (2) the final pressure in kpa.

Answers: 3

continue

Engineering, 04.07.2019 19:10, jennymares

Abarometer contains mercury with a density of 13600 kg/m3. atmospheric conditions are 95.8 kpa and 20 °c at 20 °c, the vapor pressure of the mercury is 0.000173 kpa. the column of mercury will rise to a height of most nearly. select one: a)- 0.38 m b)- 0.82 m c)- 0.48 m d)- 0.72 m

Answers: 1

continue

Do you know the correct answer?

Hot liquid is flowing in a steel pipe with an inner diameter of D, = 22 mm and an outer diameter of...