Engineering
Engineering, 18.02.2020 21:45, kay4358

One challenge for architects is that the design created today will require several years of implementation, verification, and testing before appearing on the market. This means that the architect must project what the technology will be like several years in advance. Sometimes, this is difficult to do. a) According to the trend in device scaling historically observed by Moore’s law, the number of transistors on a chip in 2028 should be how many times the number in 2018? (You may assume a 40% increase in the number of transistors per year.)b) The increase in performance once mirrored this trend. Had performance continued to climb at the same rate as in the 1990s, approximately what performance would chips have over the VAX-11/750 in 2028 (assume a 40% increase in performance per year)? You may assume that the speedup in the year 2003 over the VAX-11/750 is 6043x. c) At the current rate of increase of the mid-2000s (assume 22% per year), what is a more updated projection of performance in 2028? You may assume that the speedup in the year 2010 over the VAX-11/750 is known to be 24,129.d) What has limited the rate of growth of the clock rate, and what are architects doing with the extra transistors to increase performance?e) The rate of growth for DRAM capacity has also slowed down. For 20 years, DRAM capacity improved 60% each year. If 8 Gbit DRAM was first available in 2015 and 16 Gbit DRAM was not available until 2019, what is the current DRAM growth rate?

answer
Answers: 1

Other questions on the subject: Engineering

image
Engineering, 03.07.2019 14:10, makaylashrout77
Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.
Answers: 2
image
Engineering, 04.07.2019 18:10, jadeochoa4466
The temperature of air decreases as it is compressed by an adiabatic compressor. a)- true b)- false
Answers: 2
image
Engineering, 04.07.2019 18:10, hadellolo8839
Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false
Answers: 3
image
Engineering, 04.07.2019 18:10, lowkeyqueenk
Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk
Answers: 1
Do you know the correct answer?
One challenge for architects is that the design created today will require several years of implemen...

Questions in other subjects:

Konu
Mathematics, 28.07.2019 15:30
Konu
History, 28.07.2019 15:30