Engineering, 18.02.2020 04:50, rina62

Semi-conductors are made by adding impurities to silicon wafers. The silicon wafer is 0.1 cm thick and originally contains one phosphorus (P) atom for every 10 million Si atoms. After the diffusion process, there are 292 phosphorus atoms for every 10 million Si atoms at the top surface and the concentration at the bottom surface did not change. Calculate the concentration gradient in atomic percent/cm Note: The lattice constant of diamond cubic silicon is 5.4307 angstroms with 8 atoms per cell. The answer should have 3 decimals of accuracy.

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 15:10, theamandawhite

Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.

Answers: 1

continue

Engineering, 04.07.2019 18:10, danksans7011

The mass flow rate of the fluid remains constant in all steady flow process. a)- true b)- false

Answers: 1

continue

Engineering, 04.07.2019 18:10, katelynn73

Atmospheric air has a temperature (dry bulb) of 80° f and a wet bulb temperature of 60° f when the barometric pressure is 14.696 psia. determine the specific humidity, grains/lb dry air. a. 11.4 c. 55.8 d. 22.5 b. 44.1

Answers: 1

continue

Engineering, 04.07.2019 18:10, jojoangelique13

The flow rate of air through a through a pipe is 0.02 m5/s. a pitot static tube is placed in the flow. the radius of the pitot static tube is 1 mm. assuming the flow to be steady and the air to be at 300k, calculate the difference in total and static pressure if the diameter of the pipe is: (a) d 0.1 m d 0.05 m (c) d 0.01 m

Answers: 2

continue

Do you know the correct answer?

Semi-conductors are made by adding impurities to silicon wafers. The silicon wafer is 0.1 cm thick a...