Engineering
Engineering, 17.02.2020 22:42, JayceMeyers06

In this exercise, assume that we are considering enhanc ing a quad-core machine by adding encryption hardware to it. When computing encryption operations, it is 20 times faster than the normal mode of execution. We will define percentage of encryption as the percentage of time in the original that is spent performing encryption operations. The specialized hard- ware increases power consumption by 2%. a. [20] γ€ˆ 1.9> Draw a graph that plots the speedup as a percentage of the compu tation spent performing encryption. Label the y-axis "Net speedup" and label the x-axis "Percent encryption." ware result in a speedup of 2? encryption operations if a speedup of 2 is achievedb. [10<1.9> With what percentage of encryption will adding encryption hard- c. [10] <1.9> What percentage of time in the new execution will be spent on d. I 151 γ€ˆ1.9〉 Suppose you have measured the percentage of encryption to be 50%. The hardware design group estimates it can speed up the encryption hard- ware even more with significant additional investment. You wonder whether adding a second unit in order to support parallel encrvption operations would be more useful. Imagine that in the original program, 90% of the encryption operations could be performed in parallel. What is the speedup of providing two or four encryption units, assuming that the parallelization allowed is limited to the number of encryption units?

answer
Answers: 2

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 12:10, Ryantimes2
On a average work day more than work place firs are reorted
Answers: 1
image
Engineering, 04.07.2019 18:10, qwertylol12345
Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.
Answers: 2
image
Engineering, 04.07.2019 18:10, oliviasoreo92
Compute the pressure drop of 30Β°c air flowing with a mean velocity of 8 m/s in a circular sheet-metal duct 300 mm in diameter and 15 m long. use a friction factor, f 0.02, and pair = 1.1644 kg/m a. 37.26 pa b. 25.27 pa n c. 29.34 pa d. 30.52 pa
Answers: 1
image
Engineering, 04.07.2019 18:20, hayleymckee
Steam enters a converging nozzle at 3.0 mpa and 500Β°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent
Answers: 2
Do you know the correct answer?
In this exercise, assume that we are considering enhanc ing a quad-core machine by adding encryption...

Questions in other subjects:

Konu
English, 09.04.2021 01:00
Konu
Biology, 09.04.2021 01:00